Why Isodynamic? Contrary to a conventional dynamic driver, these transducers have a driving force distributed evenly over the whole area of their vibrating elements. The key feature of the RT2C-A and the RT2H-A is the membrane, which consists of Kapton film with a pattern of aluminum conductors. The conductors cover about 90% of the whole vibrating area. The membrane assembly is placed precisely between two rows of Neodymium and Barium Ferrite bar magnets. A larger membrane area provides higher power handling and substantially extended low-end cut-off frequency. The aluminum mounting flange, with flared waveguide, controls the frequency response and directivity of the tweeter. These tweeters are magnetically shielded and are extremely flat with a depth only 27mm including the mounting flange. Specifications: * Power handling: 30 watts RMS/60 watts max * Nominal impedance: 8 ohms * DC resistance: 7 ohms * Frequency range: 1,700-25,000 Hz * SPL: 94 dB 1W/1m * RT2C-A Dimensions: Overall Diameter: 7", Cutout Diameter: 6-3/16", Mounting Depth: 3/4" * RT2H-A * Dimensions: Overall Diameter: 7-1/8" x 6-5/8", Cutout Diameter: 6-1/8" x 6-1/8", Mounting Depth: 1-5/8".

Price$149.00

HiVi RT2II Planar Isodynamic Tweeter Aluminum

Unlike other conventional tweeters and electrostatic speakers, the RT2II has an extremely wide sound dispersion in the horizontal plane. At the same time, it has a well controlled sound dispersion in the vertical plane. This helps to avoid disturbing floor and ceiling reflections in a home environment thus enhancing clarity and imaging accuracy. The RT2II features a larger membrane and radiating area than the RT1, providing higher power handling and a substantially lower cut off frequency. The large membrane is thermally attached to the rectangular cast aluminium face plate providing cooling and dramatically increasing dynamic range. Perfect for 2 or 3-way applications. Recommended second order crossover cut-off frequency - from 1.8kHz. The Series II version of the classic RT2 offers the same sonic performance as the original, but with updated cosmetic styling. The solid aluminum faceplate includes a bead-blasted finish on the main surface, with beveled brushed-aluminum towards the sides. The result is a visually stunning tweeter that gives a modern look to any project. Specifications: *Power handling: 80 watts RMS/115 watts max *Znom: 8 ohms *Re: 7.5 ohms *Frequency range: 1,700-21,000 Hz *SPL: 94 dB 1W/1m *Dimensions: Overall Diameter: 6-1/4" by 7-5/16", Cutout Diameter: 2-3/4" by 6-3/8", Mounting Depth: 3/4".

List Price: $99.99

Price$99.00

HiVi RT8-II 8" Planar Isodynamic Aluminum Midtweet

This wonderful new product is great for bridging the gap between a high performance dynamic woofer and a planar tweeter. It is a planar transducer with a 6" by 2" element that provides a large radiating surface area and high sensitivity. Handles crossover frequencies as low as 1.5 kHz and is at its best when used with a planar super-tweeter. The solid aluminum faceplate includes a bead-blasted finish on the main surface, with beveled brushed-aluminum towards the sides. Specifications:*Power handling: 30 watts RMS/80 watts max *Znom: 6 ohms *Re: 5.5 ohms *Frequency range: 1,500 -20,000 Hz *SPL: 96 dB 2.83V/1m *Dimensions: Overall Diameter: 6-1/4" by 8-5/8", Cutout Diameter: 3-7/8" by 8", Mounting Depth: 3/4".

List Price: $149.99

Price$89.00

HiVi SP10 10" Subwoofer

"The 10 that thinks it's a 12!!" The SP10 is one of the most massive 10" subwoofers available today. Weighing in at over 28 lbs. it is a true heavyweight. The SP10 has been optimized for accurate low frequency reproduction in a small sealed enclosure of only .6 cubic ft. producing an f3 around 43 Hz. However, it is also well suited for medium-sized vented enclosure or free-air applications. Small optimum enclosure sizes, 3" voice coil, and 15.5 mm of Xmax, together make this a great subwoofer for home or automotive applications. The SP10 utilizes patented Symmetric Motor Drive (SMD) technology which reduces voice coil inductance and back EMF creating a more dynamic driver with a wider frequency range. Features full roll neoprene surround, flat non-pressed paper cone, and an aluminum cast frame. So, if you dare, jump into the ring with a true heavyweight. Specifications: *Power handling: 500 watts RMS/700 watts max *VCdia: 3" *Le: 1.35 mH *Znom: 4 ohms *Re: 3.4 ohms *Frequency range: 35-150 Hz *Fs: 34 Hz *SPL: 84 dB 2.83V/1m *Vas: .60 cu. ft. *Qms: 4.83 *Qes: .65 *Qts: .57 *Xmax: 15.5 mm *Dimensions: A: 10-1/4", B: 9-1/4", C: 5-11/16".

List Price: $299.99

Price$255.00

HiVi Trinity6 Triaxial Full Range

The Trinity6 6-1/2" tri-axial driver is a classic convergence of two distinctly innovative technologies. Employing Hi-Vi's ultra high frequency circular ribbon tweeter at the center of the 3-way configuration. This tweeter features a ribbon diaphragm and a metal phase plug. The midrange features a dual roll treated cloth diaphragm and a damped rear chamber. Trinity6 produces a uniquely broad sound spectrum with wide dispersion and unparalleled pure phase response. Three separate gold plated push terminal pairs are provided for tri-amping capabilities. Recommended minimum crossover 800 Hz and 8,000 Hz. This driver is being featured in a wide range of new products from in-ceiling speakers to home theater systems. Dimensions: Overall diameter 6.81", Cutout diameter 5.68", Depth 2.34".

List Price: $199.99

Price$145.00

JBL 2206H 12" High-Power LF Driver

The 2206H 12" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: • Power handling: 600 watts RMS • Voice coil diameter: 4" • Nominal impedance: 8 ohms • Frequency range: 45-3,500 Hz • Magnet assembly weight: 15 lbs. • Fs: 52 Hz • SPL: 95 dB 1W/1m • Vas: 2.2 cu. ft. • Qms: 4.5 • Qes: 0.34 • Qts: 0.32 • Xmax: 7.5 mm • Dimensions: Overall Diameter: 12-1/4", Cutout Diameter: 11", Mounting Depth: 5".

Price$445.00

JBL 2226H 15" High-Power LF Driver 8 Ohm

The 2226H 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: • Power handling: 600 watts RMS • Voice coil diameter: 4" • Nominal impedance: 8 ohms • Frequency Range: 30-2,500 Hz • Magnet assembly weight: 15 lbs. • Fs: 40 Hz • SPL: 97 dB 1W/1m • Vas: 6.2 cu. ft. • Qms: 5.0 • Qes: 0.33 • Qts: 0.31 • Xmax: 7.6 mm • Dimensions: Overall Diameter: 15-1/4", Cutout Diameter: 14", Mounting Depth: 5-1/2".

Price$503.00

JBL 2226J 15" High-Power LF Driver 16 Ohm

The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4", Cutout Diameter: 14", Mounting Depth: 5-1/2".

Price$500.00

JBL 2241H 18" High-Power LF Driver

The 2241H 18" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: • Power handling: 600 watts RMS • Voice coil diameter: 4" • Nominal impedance: 8 ohms • Frequency range: 30-3,000 Hz • Magnet assembly weight: 15 lbs. • Fs: 35 Hz • SPL: 98 dB 1W/1m • Vas: 11.0 cu. ft. • Qms: 5.7 • Qes: 0.43 • Qts: 0.40 • Xmax: 7.6 mm • Dimensions: Overall Diameter: 18-1/4", Cutout Diameter: 16-3/4", Mounting Depth: 7".

Price$795.00

JBL 2242H 18" Maximum Output LF Driver 8 Ohm

The 2242H is ideal for use in high output subwoofer systems with bass extension to 25 Hz. The total peak-to-peak excursion of the 2242H is 18 mm, within 10% linearity. The Super Vented Gap™ (SVG) series of low frequency transducers takes the patented Vented Gap Cooling™ (VGC) heat dissipation process one step further. A completely new motor structure design extends the pole piece above and below the top plate to improve gap flux symmetry and increase thermal conductivity from the voice coil to the pole piece. In addition to the benefits of Symmetrical Field Geometry™, these transducers also incorporate a copper shorting ring that is imbedded in the pole piece at the precise center of the gap and in close proximity to the voice coil. This ring results in a reduction of third harmonic distortion and a reduction of voice coil inductance, which improves the transducers' transient response. Specifications: *Power handling: 800 watts RMS *Voice coil diameter: 4" *Nominal impedance: 8 ohms *Frequency range: 25-1,600 Hz *Magnet assembly weight: 23 lbs. *Fs: 35 Hz *SPL: 99 dB 1W/1m *Vas: 10.0 cu. ft. *Qms: 5 *Qes: 0.29 *Qts: 0.28 *Xmax: 9 mm *Net weight: 29 lbs. *Dimensions: Diameter: 18-1/4", Cutout size: 16.85, Mounting depth: 8".

Price$999.00

Morel CAW 538 5" Cast Frame Woofer

The Classic Advanced line of woofers is based on Morel’s classic line - the renowned MW series. These products have high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spiders. This woofer has reinforced Ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points. Latest evolution of Morel's MW-144. Specifications: *Power handling: 150 watts RMS/1,000 watts max *VCdia: 3" *Le: .47 mH *Impedance: 8 ohms *Re: 5.2 ohms *Frequency range: 35-3,500 Hz *Fs: 49 Hz *SPL: 86 dB 1W/1m *Vas: .29 cu. ft. *Qms: 1.83 *Qes: .48 *Qts: .38 *Xmax: 3 mm *Dimensions: A: 5-5/8", B: 4-3/4", C: 2-9/16".

List Price: $199.99

Price$111.00

Morel CAW 638 6" Cast Frame Woofer

The Classic Advanced line of woofers is based on Morel’s classic line - the renowned MW series. These products have high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spiders. This woofer has reinforced Ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points. Latest evolution of Morel's MW-164, MW-166, and MW-168 woofers. Specifications: *Power handling: 150 watts RMS/1,000 watts max *VCdia: 3" *Le: .63 mH *Impedance: 8 ohms *Re: 6.4 ohms *Frequency range: 30-5,000 Hz *Fs: 43 Hz *SPL: 86 dB 1W/1m *Vas: .56 cu. ft. *Qms: 2.20 *Qes: .58 *Qts: .46 *Xmax: 4.25 mm *Dimensions: A: 6-5/16", B: 5-1/2", C: 2-3/4".

List Price: $199.99

Price$119.00

Morel CAW 938 9" Cast Frame Woofer

The Classic Advanced line of woofers is based on Morel’s classic line - the renowned MW series. These products have high power handling due to the aerodynamic Uniflow™ open chassis and large diameter spiders. This woofer has reinforced Ferrite magnets for the double magnet system delivering higher magnetic flux motor, resulting in a low resonance frequency and Qts points. Latest version of Morel's MW-265 and MW-266 woofers. Specifications: *Power handling: 150 watts RMS/1,000 watts max *VCdia: 3" *Le: .61 mH *Impedance: 8 ohms *Re: 6.4 ohms *Frequency range: 20-3,000 Hz *Fs: 31 Hz *SPL: 87 dB 1W/1m *Vas: 2.00 cu. ft. *Qms: 2.59 *Qes: .80 *Qts: .60 *Xmax: 4.25 mm *Dimensions: A: 8-3/4", B: 7-13/16", C: 3".

List Price: $199.99

Price$135.00

Morel DMS 30 1-1/8" Shielded Soft Dome Tweeter

A Morel classic, the DMS 30 is a very fast tweeter capable of high dynamic range without compression of SPL. Features a single magnet system vented into a damped rear chamber which lowers resonance. Ferro fluid cooled aluminum voice coil contributes to this unit's low distortion and exceptionally smooth response. 1-1/8" treated soft dome. Also available in a magnetically shielded version, the DMS 30 * Power handling: 200 watts RMS/280 watts max * Voice coil diameter: 1-1/8" * Impedance: 8 ohms * DC resistance: 5.2 ohms * Frequency response: 1,600-20,000 Hz * Fs: 700 Hz * SPL: 90 dB 1W/1m * Net weight: 1-1/4 lbs. * Dimensions: Overall Diameter: 3-11/16", Cutout Diameter: 2-13/16", Mounting Depth: 1-9/16" (2" for DMS 30), Magnet Diameter: 2-13/16", Magnet Height: 1-7/16".

List Price: $99.99

Price$78.00